| Oscilloscope Specification |
| Model Name |
MSO5022S |
MSO7102T |
MSO7102TD |
MSO8102T |
MSO8202T |
| Bandwidth |
25MHz |
100MHz |
100MHz |
200MHz |
| Sample Rate(Real time) |
100MS/s |
1GS/s (500MS/s for dual channels) |
2GS/s (1GS/s for dual channels) |
| Rise time |
≤14ns |
≤3.5ns |
≤1.7ns |
| Display |
7.8''color LCD,
STN display |
8.0'' color LCD , TFT screen, 640×480 pixels |
| Channel |
Dual channels + external trigger |
| Horizontal scale (s/div) |
5ns/div-5s/div step by 1-2.5-5 |
2ns/div~100s/div,step by 1~2~5 |
1ns/div~100s/div
step by 1~2~5 |
| DC accuracy(Average) |
Average>16:±(3%reading+0.05div) for △V |
| Vertical Sensitivity |
5mV/div -5V/div |
2mV/div -10V/div |
| DC Gain Accuracy |
±3% |
| Vertical resolution (A/D) |
8 bits (2 channels simultaneously) |
| Interpolation |
(sin x)/x |
| Max. Input Voltage |
300V (DC + AC PK-PK) |
400V ( DC + AC PK-PK ) |
| Input impedance |
1MΩ±2% in parallel with 20pF±3pF |
Probe attenuation
factor |
1X,10X,100X,1000X |
| Trigger Mode |
Edge, Video, Alternate,Pulse,Slope |
| Acquisition mode |
Normal, Peak Detect, Average |
| Record length |
Max.6K points on each channel |
Max.2M points |
| Waveform storage |
4 waveforms |
| Automatic Measurement |
Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot ,Preshoot
,Risetime,Falltime,+Width,-Width,+Duty,-Duty, Delay A→B 、 Delay A→B
|
| Waveform math |
+, -, ×, ÷,FFT |
| Power supply |
100-240V ACRMS,50Hz/60Hz,CATⅡ |
Lissajou’s
figure |
Bandwidth |
25MHz |
100MHz |
200MHz |
Phase
difference |
±3 degrees |
| Communication interface |
USB,Support USB Flash Disk Starage |
| Fuse |
1A, T grade, 250V |
| Logic Analyzer specification |
| Model Name |
MSO5022S |
MSO7102T |
MSO7102TD |
MSO8102T |
MSO8202T |
Sample rate
(real time) |
20S/s~100MS/s |
20S/s~400MS/s |
| Bandwidth |
33MHz |
66MHz |
| Channels |
16 |
| Record length |
4M/channel |
| Input impedance |
1MΩ±2% |
| Trigger mode |
Edge trigger, Bus trigger, State trigger, Data alignment trigger, Data width trigger,Distributed queue trigger |
| Trigger position setting |
Pre-trigger, mid-trigger, re-trigger |
| Threshold Voltage |
±10V(4 settings) |
| Input Signal Range |
±15V |
| Data search |
Available |
| Data System |
Binary system, Decimal system, Hex |
| Digital filter |
0,1,2 optional |
| Setting storage |
10 settings |
| USB flash disk storage |
Available |