NEW Handheld Digital Storage Oscilloscope

NEW FEATURE:
Creative design of Silica gel key offer easy touching and friendly operation

Creative design of separate shortcut key simplified operation steps


Support Alternate Trigger      Complete Video Trigger
Optimize Trigger Sensitivity   Advance Whole Measure Precision
USB Flash Disk Storage

 Main Features:
 Autoscale function
 FFT function
 20MHz~100MHz Bandwidth
 100MS/s--500MS/s real time sample rate
 2 in 1 (Multimeter function support)
 Dual Channels
 Advanced Trigger Functions
 Adjustable Trigger sensitivity
 20 Auto measurements
 Replaceable Li-ion Battery Back-up
 3.8” TFT panel
 Add new function of  Trigger Holdoff
 Waveform Record and Playback(HDS2062M-N,HDS3102M-N)


  Application:
  1. Design and Debug
  2. Circuit function test
  3. Education and technical training

  Oscilloscope Specification
 Model Name  HDS1022M-N   HDS2062M-N  HDS3102M-N   
 Bandwidth  20MHz  60MHz  100MHz
 Sample Rate ( Real time )  100MS/s  250MS/s  500MS/s
 Horizontal Scale(S/div)  5ns/div~100s/div,step by
 1~2.5~5
 5ns/div~100s/div,step by 1~2~5
 Rise time(at input, typical)  ≤17.5ns  ≤5.8ns  ≤3.5ns
 Display  3.8 inch color display with TFT panel(640×480 pixels, 65535 colors)
 Channels  Dual
 Input impedance  1MΩ±2%,in parallel with
 20pF±5pF
 1MΩ±2%,in parallel with 15pF±5pF
 Record length  Max. 6000 points on each channel
 Interpolation  (sin x)/x
 Probe attenuation factor  1X,10X,100X,1000X
 Input coupling

 DC, AC, GND

 DC accuracy(Average)  Average>16:±(3% reading
 +0.05div) for △V
 Average>16:±(5% reading+0.05div) for △V
 Vertical Sensitivity  5mV/div~5V/div (at input)
 Vertical resolution (A/D)  8 bit(2 channels simultaneously )
 Max. Input Voltage  400V (PK-PK) (DC + AC PK-PK, 1MΩ input impedance, Probe attenuation
 10:1)
 Trigger Type  Edge, Video, Alternate
 Trigger Mode  Auto, Normal, Single
 Trigger level  ±6 divisions from screen center
 Acquisition modes  Sample, Peak Detect and Average
 DC gain accuracy  ±5%  ±3%
 Automatic Measurement  Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot
 ,Preshoot,Risetime,Falltime,+Width,-Width,+Duty,-Duty, Delay A→B
 Delay A→B
 Waveform math  +, -, ×, ÷, Invert, FFT
 Waveform storage  4 waveforms
 Lissajou’s
 figure
 Bandwidth  20MHz  60MHz  100MHz
 Phase difference  ±3 degrees
 Communication interface  USB
 Power supply  100V-240V AC, 50/60Hz
 Li-ion battery  7.4V, 6 hours operation
 
  Multimeter specifications
 Full scale reading  3 3/4 digits (Max.4000-count)  Diode  0V-1.5V
 Input Impedance  10 MΩ  On/Off measurement  <50(±30) beeping
 Capacitance  51.2nF-100uF:±(3%±3 digit)
 Voltage  VDC:400mV,4V, 400V: ±(1±1digit) Max.input:DC 400V, VAC:4V,40V,
 400V:±(1±3digit)
 Frequency:40Hz-400Hz, Max:input:AC 400V(virtual value)
 Current  DCA:40mA, 400mA:±(1.5%±1 digit) 20A:±(3%±3digit)
 DAA:40mA±(1.5%±3digit) 400mA:±(2±1digit) 20A:±(3%±3digit)
 Impedance  400Ω:±(1%±3digit), 40Ω
 
  General specifications
 Interface  USB Data Cable (Transfer waveform data to a PC)
 Power  Supply:100V~240V AC,50/60Hz   DC input: 8.5VDC, 1500mA 
 Battery: 6 hours
 Dimension  180mm x 113mm x 40mm
 Weight  645g